|
|
|
|
|
UMDJ9/9.3
Secure wall mounted patching / cable termination box allowing connection of
up to 24 or 48 fibres onto Uniter panels. The dual level boxes provide protection between installer
and operator functions. The boxes are supplied with splice trays, connectors and pigtails installed
to reduce installation time. A variety of different connector types are available.
|
|
Download the brochure
(1.640 KB)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ORDJ6.0
A 1U splicing, patching and storage shelf allows the connection of up to 12
fibres onto a uniter panel. The shelf is compatible with 19" and ETSI rack practices and can store
patchcord overlengths. Cables enter the shelf on the right hand side and pigtails exit the unit on
the same side. The shelf is supplied with pigtails and uniters pre-installed to save installation
time. |
|
|
Download the brochure
(219 KB)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ORDJ6.3
This 1U splicing and patching shelf allows up to 24 fibres to be connected to
a uniter panel. The shelf is compatible with 19" and ETSI racks. Cables enter the shelf on the
right hand side and pigtails exit the unit on the same side. The shelf is supplied with pigtails
and uniters pre-installed to save installation time. |
|
|
Download the brochure
(219 KB)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sirocco Splicing Shelf
The shelf provides the splicing capacity for up to 8 connectorised pigtails
to Sirocco Blown fibre units. The shelf is supplied with one pair of connectorised pigtails as
standard and 3 additional pairs of pigtails may be added when system up grades are required. Two
Blown Fibre tube entries are provided at the front of the shelf enabling 2 or 4 fibre Blown Units
to be installed. |
|
|
Download the brochure
(198 KB)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Customer Lead-in Unit
Enables external cable to be passed through the building fabric from an
outside wall, typically for business premises. It contains two separate units mounted either side
of the wall, connected by a length of conduit. It can be used with Sirocco® blown fibre tubing or
conventional optical cable.
|
|
|
Download the brochure (FTTH)
(723 KB)
|
|
Download the brochure (Business)
(607 KB)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blown Fibre Gas Seal Unit
Typically used in business premises, this is a wall-mounted unit positioned
internally at the cable entry point. Incoming external blown fibre tubing is attached to internal
blown fibre distribution tubing using gas seal connectors within the unit. The connectors are used
on both populated (with blown fibre bundle) and unpopulated blown tubing. |
|
|
Download the brochure
(143 KB)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FTTH Entry Kit
Used to provide an ergonomic and managed cable entry (conventional cable or
blown fibre tube cable) at the customer's premises. Comprises customer lead-in units, connecting
conduit and termination box, for residential or small business use. |
|
|
Download the brochure
(592 KB)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4F Compact Termination Box
Designed for use in residential and business applications for the termination
of up to 4-fibres. This small but elegant unit enables the installation of either a single Sirocco
blown fibre tube cable using up to a 4-fibre blown unit or two 2-fibre ruggedised cables to be
spliced to four SC pigtails which connect to adapters at the base of the unit. |
|
|
Download the brochure
(178 KB)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 & 24 F Internal Termination Boxes
Designed for use in both small and large business premises for up to
24-fibres. Each wall box is supplied pre-configured with pigtails and adapters ready for splicing
to incoming cable. |
|
|
Download the brochure
(313 KB)
|
|
|
|
|
|
|
|
